Folks,
My stepdad gave me his old lawnboy a week or so ago since he'd bought a new Toro to replace it. He's always cared very well for this mower and I'm glad he chose to pass it down to me instead of junking it. He told me that it wasn't running right and he didn't feel like messing with it anymore and opted to replace it. Upon tinkering with it today, I got it to fire up and run, however it was smoking a bit more than it used to and was running very slow almost like it was choking out. I cleaned out the carb and checked the little filter that was in the line and all was clean. It's got good spark and a brand new plug as well. Upon trying to turn the adjustment screw on the carb, I got little to no results with it, in fact the further I turned it in the better it ran and performed it's best with the screw seated. I turned off the fuel valve and let it run out and right in the middle to the end of it doing this it sped up and started to sound like normal until it died out from lack of fuel. Any ideas on where to go from here? It is a walbro carb on this beast. Thanks in advance for any help.
Dave
My stepdad gave me his old lawnboy a week or so ago since he'd bought a new Toro to replace it. He's always cared very well for this mower and I'm glad he chose to pass it down to me instead of junking it. He told me that it wasn't running right and he didn't feel like messing with it anymore and opted to replace it. Upon tinkering with it today, I got it to fire up and run, however it was smoking a bit more than it used to and was running very slow almost like it was choking out. I cleaned out the carb and checked the little filter that was in the line and all was clean. It's got good spark and a brand new plug as well. Upon trying to turn the adjustment screw on the carb, I got little to no results with it, in fact the further I turned it in the better it ran and performed it's best with the screw seated. I turned off the fuel valve and let it run out and right in the middle to the end of it doing this it sped up and started to sound like normal until it died out from lack of fuel. Any ideas on where to go from here? It is a walbro carb on this beast. Thanks in advance for any help.
Dave