Hi all,
I have an old H1011s. While working on starting issue, I inadvertently pulled the wires off the key switch. Not sure how to plug them back in.
This is a 6 post key switch. 5 posts are stamped as follows: L, G, B, S, M and one that doesn't have a designation.
The wires are the following colors:
2 white wires
1 black wire
1 black with a green stripe
1 black with a red stripe
1 black with a light blue stripe
Hoping someone can help me match the wires to the switch.
Thanks
I have an old H1011s. While working on starting issue, I inadvertently pulled the wires off the key switch. Not sure how to plug them back in.
This is a 6 post key switch. 5 posts are stamped as follows: L, G, B, S, M and one that doesn't have a designation.
The wires are the following colors:
2 white wires
1 black wire
1 black with a green stripe
1 black with a red stripe
1 black with a light blue stripe
Hoping someone can help me match the wires to the switch.
Thanks