Export thread

Key switch wiring question

#1

M

mixpat

Hi all,
I have an old H1011s. While working on starting issue, I inadvertently pulled the wires off the key switch. Not sure how to plug them back in.

This is a 6 post key switch. 5 posts are stamped as follows: L, G, B, S, M and one that doesn't have a designation.

The wires are the following colors:
2 white wires
1 black wire
1 black with a green stripe
1 black with a red stripe
1 black with a light blue stripe

Hoping someone can help me match the wires to the switch.

Thanks


#2

Tiger Small Engine

Tiger Small Engine

mixpat said:
Hi all,
I have an old H1011s. While working on starting issue, I inadvertently pulled the wires off the key switch. Not sure how to plug them back in.

This is a 6 post key switch. 5 posts are stamped as follows: L, G, B, S, M and one that doesn't have a designation.

The wires are the following colors:
2 white wires
1 black wire
1 black with a green stripe
1 black with a red stripe
1 black with a light blue stripe

Hoping someone can help me match the wires to the switch.

Thanks
Click to expand...
L=lights
G= ground
B=battery
S=solenoid
M=magneto

Never pull all wires off of something without labeling them first.


#3

StarTech

StarTech

Hind sight is 20/20 but now the OP would need to purchase the shop manual.

H1011S H1011R H1011HS Riding Mower Shop Manual | Honda Power Products Support Publications

The Honda H1011S, H1011R, H1011HS Riding Mower Shop Manual covers service and repair procedures for the H1011S, H1011R, and H1011HS riding mowers.
publications.powerequipment.honda.com publications.powerequipment.honda.com


#4

M

mixpat

Tiger Small Engine said:
L=lights
G= ground
B=battery
S=solenoid
M=magneto

Never pull all wires off of something without labeling them first.
Click to expand...
I'm tracing what I think is an intermittent electrical problem. With the H1011, you cant really get to the wiring without taking the whole plastic body off. I simply forgot to release the key switch from the body so, when I pulled it the wires were pulled off the switch. Duh!


#5

StarTech

StarTech

From what I can find on the H1011 the switch was suppose to have a connector housing and if the wires pulled out of it then they were you problem to start with.

www.repairmanual.com

Honda H1011S H1011R H1011HS Riding Mower Shop Manual

This Official Honda H1011S H1011R H1011HS Riding Mower Shop Manual provides repair and maintenance information for the H1011S H1011R H1011HS Riding Mower.
www.repairmanual.com www.repairmanual.com


Footer Links 1

Top