Export thread

K-66 Tufftorque oil change

#1

D

drmax

Has anyone performed xmission oil change at home on one of there on their "Conquest"? I've got the 3 qts of full syn. 5W50 and just weight to burn the fuel outta the tank, before getting into it.
My question is...how much stuff has to be disassembled, until getting to top of xmission? It would appear to me that the fenders assy, seat platform and fuel tank. Please advise...if you've done this job. Thx, DM


#2

D

drmax

Hey, I've done this oil change....oh wait a minute...I posted this thread! Yep I did this oil change 2 days ago and there was some disassembly. Maybe took 1 hour. The oil that was in there looked awfull at 200 hrs. I replaced with the "now" recommened synthetic. Later


#3

Grassbandit

Grassbandit

do you recall exactly how much oil you had to put back in?


#4

D

drmax

do you recall exactly how much oil you had to put back in?
Hard to remember...may bought 3 qts and had a bit left over. Best money spent and use syn. as per outlined by them...and if you search, you should find your answer here....
https://www.tufftorqservices.com/EnvEEdefault/FlatHTML/TechInfo/docs/manuals/k61.pdf
Just find your model. My 66 don't have filter, nor air purging require.
Good luck


#5

Grassbandit

Grassbandit

Hard to remember...may bought 3 qts and had a bit left over. Best money spent and use syn. as per outlined by them...and if you search, you should find your answer here....
https://www.tufftorqservices.com/EnvEEdefault/FlatHTML/TechInfo/docs/manuals/k61.pdf
Just find your model. My 66 don't have filter, nor air purging require.
Good luck

Thanks a million.


Top