Steven Snyder
Forum Newbie
- Joined
- Aug 4, 2012
- Threads
- 1
- Messages
- 1
New member here!
My JD JS26 (I bought it in 2011) won't start. I checked for spark, and there was none. So I pulled the wire that is on the safety kill switch and it started right up.
I am not an experienced wrench turner by any stretch and I am not sure how to get to the switch itself. I have taken off a few bolts that appear to hold the metal cover on, but it looks like the oil filler tube will have to come off?
Any advice, diagrams, links, information on how to proceed would all be greatly appreciated
My JD JS26 (I bought it in 2011) won't start. I checked for spark, and there was none. So I pulled the wire that is on the safety kill switch and it started right up.
I am not an experienced wrench turner by any stretch and I am not sure how to get to the switch itself. I have taken off a few bolts that appear to hold the metal cover on, but it looks like the oil filler tube will have to come off?
Any advice, diagrams, links, information on how to proceed would all be greatly appreciated