PTO switch locked in neutral position on toggle style switch
#2
Richie F
Info of the machine please.
Model and serial number.
#3
Jinglesj
Got it going. Now working on my daughter John deere gx75
#4
tom3
Is this one of those that you pull up on to allow the switch to move?
#5
Jinglesj
Yes it is. Was seized up, I pulled it off and lubed it with graphite. Glad to say is working great now!
#6
Jinglesj
I'm now working on a John Deere gx75 of my daughter. Seems to have ( I call) dead short. Keeps blowing fuse every time you turn key to start it. Replaced the ignition switch but to no avail. Gonna start chasing down the short tomorrow.
#7
Richie F
Blowing a fuse is a short.
When the fuse blows is it just when you turn the key on or when you go passed that and try to use the starter ?
Replacing the switch isn't the problem, it's down stream from that.
Does your ignition switch have 5 terminals ?
#8
Jinglesj
I'll check for sure tomorrow and get back to you on it. Been busy with grandbabies today
