IS2100 ZT4400 oil filters

bullet bob

Well-Known Member
Joined
Nov 14, 2019
Threads
21
Messages
155
I'm trying to find just the OEM hydro filters & 'O' rings for my neighbor's 2016 Ferris is2100 with the 28hp efi engine. I se where they sell a kit but thought I could save him a dime and piece it together.......Also, I run Mobile 1 15W50 in my gravely. Suggestions for this Ferris? Thanks!
 

StarTech

Lawn Royalty
Top Poster Of Month
Joined
Feb 19, 2020
Threads
77
Messages
10,227
The kit should be HG-71943 or Ferris 5104385X1. Two kits will require if service both hydros.
 

bullet bob

Well-Known Member
Joined
Nov 14, 2019
Threads
21
Messages
155
Great, thanks. Now, how about the weight of oil?
 

StarTech

Lawn Royalty
Top Poster Of Month
Joined
Feb 19, 2020
Threads
77
Messages
10,227
Quoting Hydro Gear service manual.
The fluids used in Hydro-Gear products have been carefully selected, and only equivalent, or
better products should be substituted. Typically, an engine oil with a minimum rating
of 9.0 cSt (55 SUS) at 230°F (110° C) and an API classification of SL is recommended. A 20W-50
engine oil has been selected for use by the factory and is recommended for normal operating
temperatures. Biodegradable oils are not approved for this unit as they degrade too quickly
while in service.
This is conventional engine oil and 15w50 Full Synthetic can used as a replacement and actually
better oil according to Tuff Torq as it has better temperature range and doesn't break down as
easily. This what Tuff Torq supplies as replacement oil even though their units also spec the 20W50
motor oil.
ZT-4400 oil fill.JPG
 

slomo

Lawn Addict
Joined
Jul 14, 2019
Threads
76
Messages
4,704
Пин Ап Казино или же Pin Up Casino эти игровые автоматы не обещают каждому игроку миллионы долларов, они лишь выполняют свои обязанности и четко выплачивают выигрыши!
You don't say.....

slomo
 
Top