Export thread

Intek 206 5.5 OHV-Idle problem

#1

K

Katman

My Lawnmower starts right up,but at low idle speed it's really rough! should I overhaul my carb? Got this from a friend he didnt start it up for a long time it sitting in his garage. So I emptied the fuel changed the gas and also tuned it up! Starts with one pull runs good except poor idle at low speed! Can anybody give me some advice?


#2

066

066

Hi, yep sounds like a good idea to pull the carb off & give it a good clean up, the old fuel that sat in the carb may have gone off/stale & started to block up the idle circut in the carb, get some carb cleaner in a aerosol can & spray the small pasages/jets (don't forget eye protection) some compressed air may be needed too, once back togeather - make sure the fuel line from the tank is clear & fresh fuel is in the tank. hope this helps.


#3

K

Katman

.
Hi, yep sounds like a good idea to pull the carb off & give it a good clean up, the old fuel that sat in the carb may have gone off/stale & started to block up the idle circut in the carb, get some carb cleaner in a aerosol can & spray the small pasages/jets (don't forget eye protection) some compressed air may be needed too, once back togeather - make sure the fuel line from the tank is clear & fresh fuel is in the tank. hope this help


#4

EngineMan

EngineMan

.
Hi, yep sounds like a good idea to pull the carb off & give it a good clean up, the old fuel that sat in the carb may have gone off/stale & started to block up the idle circut in the carb, get some carb cleaner in a aerosol can & spray the small pasages/jets (don't forget eye protection) some compressed air may be needed too, once back togeather - make sure the fuel line from the tank is clear & fresh fuel is in the tank. hope this help

Is it me, or have you giving a answer to your own question (problem) here


#5

C

chance123

.
Hi, yep sounds like a good idea to pull the carb off & give it a good clean up, the old fuel that sat in the carb may have gone off/stale & started to block up the idle circut in the carb, get some carb cleaner in a aerosol can & spray the small pasages/jets (don't forget eye protection) some compressed air may be needed too, once back togeather - make sure the fuel line from the tank is clear & fresh fuel is in the tank. hope this help

.........? we see your quote, but no message


#6

K

Katman

Sorry about that! I'm new to this pressed the wrong button!


Top