Export thread

Idle speed

#1

D

dtogno

My Cub Cadet XT! with Kohler 22 HP 7000 series idles way too fast there isn't a needle aDjustment What can be done?


#2

StarTech

StarTech

If it don't have normal idle speed adjustment screw then it must have the bendable tang.

1662856512922.png


#3

D

dtogno

StarTech said:
If it don't have normal idle speed adjustment screw then it must have the bendable tang.

View attachment 62189
Click to expand...
thanks for for the reply but there’s no adjustment needle screw.


#4

D

dtogno

dtogno said:
My Cub Cadet XT! with Kohler 22 HP 7000 series idles way too fast there isn't a needle aDjustment What can be done?
Click to expand...
where can i view a diagram of this bendable tab


#5

Hammermechanicman

Hammermechanicman

Some kohler's idle fast because the linkage won't close the butterfly all the way. You have to loosen screws and move the entire linkage plate assy to adjust it.


#6

StarTech

StarTech

I don't have any images of this but it should be at the end of the governed idle spring on the control assy. Basically you are adjusting the tension on the spring at idle.


#7

D

dtogno

StarTech said:
I don't have any images of this but it should be at the end of the governed idle spring on the control assy. Basically you are adjusting the tension on the spring at idle.
Click to expand...
thank you


Footer Links 1

Top