Export thread

Husvarna 350 Chainsaw

#1

H

hitmanharleyk

What size file do I need for shapering the chain on this saw?

I inherited one in great shape and was curious as to if there in a "standard" pitch for this saw.

It hadn't been run in almost 2 years, I added gas and with 2 pulls she was purring like a new one. After my father passed somehow it got stuck in a ice cooler and was "lost" for a while, but I guess that was a good thing as it kept it out of the elements.


#2

pugaltitude

pugaltitude

Depends on what chain and bar that is on it.
Usually an 18" guide bar with .325" chain so file would be 3/16 or 4.8mm.
There should be a number or letter on the chain or numbers on the guide bar.


#3

Ric

Ric

hitmanharleyk said:
What size file do I need for shapering the chain on this saw?

I inherited one in great shape and was curious as to if there in a "standard" pitch for this saw.

It hadn't been run in almost 2 years, I added gas and with 2 pulls she was purring like a new one. After my father passed somehow it got stuck in a ice cooler and was "lost" for a while, but I guess that was a good thing as it kept it out of the elements.
Click to expand...

With the time that's involved in sharpening a saw it's cheaper and easier to just buy a replacement chain or blade.


#4

H

hitmanharleyk

Where does the 350 fall as far as Commercial or Home-Owner?

Never owned a saw even though I have ran one plenty, grew up on a farm. Considering this one was free with very few hours, it is a good deal either way.


Footer Links 1

Top