Husqvarna Trimmer bogs when throttle is pulled.

DHQUINN40

Forum Newbie
Joined
Sep 25, 2012
Threads
2
Messages
2
Is this a dirty carb situation or are their other underlying issues? Either way what all should I do to try to get it running again. I also have a Homelite that is doing the same thing.
 

chance123

Well-Known Member
Joined
Aug 14, 2012
Threads
11
Messages
824
With small 2 stroke engines, it is easy to see the condition of the piston and cyl by removing the muffler and looking into the exhaust port. Before that though, check to see that you have AT LEAST 85-90 psi compression. If you don't NWR (not worth repair) well I take that back. ( I still had Roybi on my mind) Husqvarna cyl & piston kits are re$onable.
 

Ric

Lawn Pro
Joined
May 7, 2010
Threads
142
Messages
5,765
Is this a dirty carb situation or are their other underlying issues? Either way what all should I do to try to get it running again. I also have a Homelite that is doing the same thing.

If the trimmer bogs or is down on power or doesn't run smoothly at its max RPM try pulling the Spark Arresting screen in or on the muffler and clean the screen. They get heavily carbonized and create low power. Try it first before messing with carb. I just did the same thing today on my Stihl. It sounds like your problem.
 
Top