Export thread

Have an older model Husqvarna 2148, model LO21H48F, lawn tractor that I cannot find a part for. I am probably searching for the holy grail of mower deck lift link Husqvarna part number 532175470. This is the left hand side lift link and bolt assembly. Broke mine this AM. BTW, cost me a knuckle hell of a knuckle cut getting the broken side removed. All searches state this link is unavailable. Can anyone help. Does anyone have an older mower that I could purchase this link from them? Help! MTG

I looked, turned up nothing. Double check and make sure all your numbers are correct

Yes, part number is not correct. I made one from a 3/8” rod this afternoon. Not sure it will work. Actually steel rod is a 1/32”smaller than original. But, never know. I would like an original and the Husqvarna part number is 532175370. This is the LH mower deck lift link. In my original post I wrongly stated 532175470. This is incorrect.
532175370 LH mower deck link assembly. I have the nut but really damaged. Tom

Post the 11 didget model no. can't get that model to come up

This is a 2004 Husqvarna YTH2148B or F.
I researched the part online to find it unavailable. Again the part number 532175370. It is the 2148 three blade model. Also try LO21H48.

I think it may be part #56 Bar Adjusting wheel gauge. If not, look at the Link below with the exploded view of
deck assembly, pick out the part with number and if you find it will give you everything
you need to order

I called Jacks. They do not have this part. I went on eBay. It lists many links but not specifically for my old mower. I’m at a loss. Perhaps my homemade one will work. Will keep this forum advised, MTG

Yes, it's part #11 on this Link. No Longer available

Just looking at the small picture, looks like it would be pretty easy to fabricate in a Metal/Welding/Fabrication shop if you took the old one by for them to go by