Export thread

Husqvarna LC221RH Transmission Tension Spring Placement

#1

G

Gpag

When repairing the drive belt on this mower I took the transmission tension spring off, which I am now trying to put back on. The owners manual says that one end of the spring connects to one of the belt keepers and the other end connects to the back insert. The manual does not show the spring or how it connects. I see where it connects to the belt keeper but cannot see how this spring attaches to the rear insert. I brought it to an approved repair center but they couldn’t figure it out. I’ve used the service chat line on the Husqvarna web site but they couldn’t figure out and sent the question to a Husqvarna support, which is not responding.
Does anyone know how h is spring attaches?
Is there a way to get in touch with Husqvarna support by phone? They seem to take great pains to prevent that.
Thanks.


#2

M

MowLife

Is this a AWD?


#3

M

MowLife

D1D7EA95-91E7-4ECF-84D6-335C5F9E5107.jpg

This is where my AWD spring is located if this helps.


#4

G

Gpag

Not AWD, 2 wheel drive. Thanks for the photo Mowlife. Is your mower the same model?


#5

M

MowLife

My model is a LC221A


#6

C

Cantgetright

I’m having the same issue. Replaced the belt and for the life of me can’t figure out where the spring attaches. It feels like the twilight zone with this one


#7

G

GfpRacing

Mine is rear wheel Drive the spring came Off I can Not Find were it Hooks to


#8

R

Rivets

That spring attaches to the tranny, pulling it up to release the belt tension.


Top