Export thread

Husky YTH20K46

#1

C

charlie77

Mower wont move drive belt is tight fan is spinning. The small lever in the back to disengage to free wheel makes no difference where it is always free wheels. Its connected and moves the rod back and forth. Don't know where to go. belt


#2

M

mechanic mark

Rod at back should be pushed all the way in, Safety First- everyone out of way, remove deck, scotch front wheels, jack up backside of tractor carefully, crank it up & see if wheels turn. Let us know what you find, thanks. Post model & serial numbers from tractor data plate or sticker.


#3

C

charlie77

mechanic mark said:
Rod at back should be pushed all the way in, Safety First- everyone out of way, remove deck, scotch front wheels, jack up backside of tractor carefully, crank it up & see if wheels turn. Let us know what you find, thanks. Post model & serial numbers from tractor data plate or sticker.
Click to expand...


They spin very slowly and sometimes not at all. I can stop it with my hand


#4

M

mechanic mark

http://www.husqvarna.com/ddoc/HUSO/HUSO2011_NAen/HUSO2011_NAen_YTH20K46_532441457.pdf see page 26, loss of drive.

http://www.husqvarna.com/ddoc/husi/husi2011_naen/husi2011_naen_yth20k46_532446280r1.pdf check out pages 8 & 9 in this parts manual, with deck off, what kind of shape is drive belt & 3 idler pulleys in? you will need to remove idler pulleys to inspect bearings for being rough, dragging, etc. When replacing parts always use OEM parts. Let us know how it goes, thanks. how old is tractor, year?

https://www.tufftorqservices.com/EnvEEdefault/FlatHTML/TransaxleIdentification/LT_K46.htm this is your transaxle K46, thought I'd post this in case you want to read up on it.


#5

S

shiftsuper175607

mechanic mark said:
http://www.husqvarna.com/ddoc/HUSO/HUSO2011_NAen/HUSO2011_NAen_YTH20K46_532441457.pdf see page 26, loss of drive.

http://www.husqvarna.com/ddoc/husi/husi2011_naen/husi2011_naen_yth20k46_532446280r1.pdf check out pages 8 & 9 in this parts manual, with deck off, what kind of shape is drive belt & 3 idler pulleys in? you will need to remove idler pulleys to inspect bearings for being rough, dragging, etc. When replacing parts always use OEM parts. Let us know how it goes, thanks. how old is tractor, year?

https://www.tufftorqservices.com/EnvEEdefault/FlatHTML/TransaxleIdentification/LT_K46.htm this is your transaxle K46, thought I'd post this in case you want to read up on it.
Click to expand...

mechanic mark, seems like you have him headed in the right direction if he will follow through.
Wonder if he removed the deck?


#6

C

charlie77

shiftsuper175607 said:
mechanic mark, seems like you have him headed in the right direction if he will follow through.
Wonder if he removed the deck?
Click to expand...

thanks a ton guys get to it this weekend


#7

C

charlie77

charlie77 said:
thanks a ton guys get to it this weekend
Click to expand...


Thanks to all of you who helped. CANT BELIEVE ALL IT WAS .................broken keyways!!!I thought the tranny was shot!!!


#8

S

shiftsuper175607

charlie77 said:
Thanks to all of you who helped. CANT BELIEVE ALL IT WAS .................broken keyways!!!I thought the tranny was shot!!!
Click to expand...

Congratulations!

Thanks for letting us know...someone else may have a similar problem.


#9

PIJoe

PIJoe

Glad you got 'er rolling again- and agreed- thanks for the update! I don't know how many times I've looked at other forum posts and the OP never replies to say what the fix was! :confused2:

Happy mowing!


Footer Links 1

Top