Export thread

how to repair bent and broken yoke shaft - exmark & toro 60''

#1

demhustler

demhustler

just kidding : ))) that's trash : ))) Q is - how the hell 1 inch thick shaft on 60'' mower can be bent? : ))) demit ...
0609151818-sm.JPG06091518321-sm.JPG
28806d1465669572-how-repair-bent-broken-yoke-shaft-exmark-toro-60-a-0609151818-sm-jpg


28807d1465669610-how-repair-bent-broken-yoke-shaft-exmark-toro-60-a-06091518321-sm-jpg


#2

5

577jersey

Easy,some of these mower go pretty fast,,especially the red ones.........is the driver still intact?? lol??
Years ago I had a castor fall off a walk behind,guess the quick clip came out.. and got ran over by the deck,,the blade put a nice notch in the side of the metal :)


#3

clpolcar

clpolcar

Heat it up and bend it back or you can cut the rideout,weld a new 5/8 ot whatever size rod in it and drill a hole through it and put a pin through it


#4

5

577jersey

Heat it up and bend it back or you can cut the rideout,weld a new 5/8 ot whatever size rod in it and drill a hole through it and put a pin through it
Yeah,it dont have to be perfect right,,its just a castor...them things are never rolling straight.


#5

clpolcar

clpolcar

Yeah,it dont have to be perfect right,,its just a castor...them things are never rolling straight.
I mean I would getit straight but as long as it spins on the mower deck
it's fine.


Top