I've cleaned both left and right Ratchets. I used to lock when making turns to the left. After cleaning it now locks when pulling straight back. Forward is fine. Starts great. I'll replace the ratchet if that is what it takes but I want to make sure this is the problem. Any help is appreciated. Diane007
Engine not running, front wheels on ground & rear wheels off ground by placing a 4x4 or several 2x4 pieces of wood under deck try rotating rear wheels both ways & let us know what you find.
Engine not running, front wheels on ground & rear wheels off ground by placing a 4x4 or several 2x4 pieces of wood under deck try rotating rear wheels both ways & let us know what you find.
Engine not running, front wheels on ground & rear wheels off ground by placing a 4x4 or several 2x4 pieces of wood under deck try rotating rear wheels both ways & let us know what you find.
OK, Left wheel rotates freely forward and sluggish backward, Right wheel rotates freely forward and backward. (not sure I replied in the forum correctly since I didn't get a reply, My bad I'm sure)
OK, Left wheel rotates freely forward and sluggish backward, Right wheel rotates freely forward and backward. (not sure I replied in the forum correctly since I didn't get a reply, My bad I'm sure)
read my edited post above, let us know how it goes after you contact robert@honda
#6
apwillard1986
Generally the symptoms you are describing are indicative of worn rear axle bearings. It's fairly common on these mowers as they are not sealed bearings. The grease collects dust and dirt and over the years the bearings fail. You might pull the wheels and check the condition of the axle bearings. You'll find them pressed into the adjuster with the axle runnin through them...
