grease sert problem

[obielee]

mower: husqvarna 30 in. 0 turn, i cant fina an easy way to lube the stering control shafts. with the cables and battery location, i cant get the grease gun tip on the serts. i even bought. i purchased a flex-hose and was still unsucessfull. what do i do now? any 0 turn husqvarna owners out there that can help me out? thanks, obie

 

[exotion]

mower: husqvarna 30 in. 0 turn, i cant fina an easy way to lube the stering control shafts. with the cables and battery location, i cant get the grease gun tip on the serts. i even bought. i purchased a flex-hose and was still unsucessfull. what do i do now? any 0 turn husqvarna owners out there that can help me out? thanks, obie

You can buy the angle zerks and put it on maybe with an agle and felx hose I hope you can get it lubed. If all else fails you can try and get a needle like when you lube a u joint

 

[benski]

Those zerk fittings can be a four star pain to reach sometimes. As exotion alludes to you might try a 90* fitting. I've cobbled together some weirdly shaped fixes out of 1/8" pipe elbows and 45* fittings. Other than that disassembly may be your best choice..