Gravely Pro Belt

[CompIllitR8]

Does anyone have a belt diagram for a Pro 50" Model # 988059? There is a lot of slack even with the pto engaged. It looks to me like my belt is too big, I measured the belt at 84". Thanks for any info.

 

[djdicetn]

Does anyone have a belt diagram for a Pro 50" Model # 988059? There is a lot of slack even with the pto engaged. It looks to me like my belt is too big, I measured the belt at 84". Thanks for any info.

OK.....I asked about your new Pro 50 in your post in the Gravely/Ariens Owners Check-In thread. But with you providing a Model# here, I was able to find both an Owner's Manual and a Parts manual on the Gravely website. See the links below:

Owner's:

http://apache.ariens.com/manuals/088745D.pdf


Parts:

http://apache.ariens.com/manuals/088744F.pdf


P.S.
OK, after "looking again", that Model# you gave is getting a hit on the Gravely website as a "Pro 150". Is that what you have???????


Hope this helps.....please post a picture on the Gravely forum(we wanna see it:0)

 

[CompIllitR8]

OK.....I asked about your new Pro 50 in your post in the Gravely/Ariens Owners Check-In thread. But with you providing a Model# here, I was able to find both an Owner's Manual and a Parts manual on the Gravely website. See the links below:

Owner's:

http://apache.ariens.com/manuals/088745D.pdf


Parts:

http://apache.ariens.com/manuals/088744F.pdf


P.S.
OK, after "looking again", that Model# you gave is getting a hit on the Gravely website as a "Pro 150". Is that what you have???????


Hope this helps.....please post a picture on the Gravely forum(we wanna see it:0)

Thanks for the info. I'll try to get a pic posted this weekend. I think it may be a Pro 150. It's a little worn, but $300 was to good to pass up.

 

[CompIllitR8]

Well, I think I have it fixed. I pulled the 3/8" belt that was on it and replaced it with a 1/2" and it seemed to be working. I'll have to try it out after work today unless it's too wet here. Just my luck, I get the mower going just in time for the rain.