Export thread

Garry

#1

G

Garry rausch

Have an mtd pro 6 hp. Set for 4 years. Replace carb. Plug. Primer. Cleaned fuel lines. Will only idle


#2

ILENGINE

ILENGINE

6 hp pro what It this a snow thrower, lawnmower, logsplitter, tiller, weedeater, Lets start with the actually model number of the item from the tag and if possible the model information from the engine tag.


#3

G

Garry rausch

Mo. 11a-589b795


#4

G

Garry rausch

My bad. Push mower


#5

ILENGINE

ILENGINE

Looks like the 122K02-0337-E1 engine. Is the governor spring present and connected
Item 209a is this diagram
www.partstree.com

PartsTree - Home of OEM Parts for Outdoor Power Equipment

We are committed to providing you with the largest selection of OEM parts from the best brands, the best diagrams and part search tools anywhere.
www.partstree.com www.partstree.com
Hooks between the loop in item 202 and the eye in this item


#6

G

Garry rausch

ILENGINE said:
Looks like the 122K02-0337-E1 engine. Is the governor spring present and connected
Item 209a is this diagram
www.partstree.com

PartsTree - Home of OEM Parts for Outdoor Power Equipment

We are committed to providing you with the largest selection of OEM parts from the best brands, the best diagrams and part search tools anywhere.
www.partstree.com www.partstree.com
Hooks between the loop in item 202 and the eye in this item
Click to expand...
You were spot on checked spring. When I replaced carb of hooked up spring wrong causing there to be no tension on the spring. Mower fired up and ran well. Thanks so much


Footer Links 1

Top