Whoever has a Deere database, can u tell me how much trans fluid the G100 tractor K66C(at least that's what I found online) transmission holds?
I find conflicting numbers online - 1 quart 2 quart, 1 drain bolt, 2. I drained mine and it takes 1 quart and upon shaking the tractor, I see the fluid sloshing around so it IS full(after driving it varying speeds to purge air).
TIA.
#2
StarTech
And it looks like the drain only partial drains this version of the Tuff Torq K66 unit. The fill cap is for a dry unit.
#3
upupandaway
Maybe park on the side of a hill when I change it next time?!?!?.... Maybe I would have to do what I did on another deere trans - drill\tap new drain plugs to fully drain it.
THANKS!!!
*UPDATE*
Looking underneath the trans, I found some numbers and looking up pictures of the numbers I found, it is NOT a K66 trans after all. From a video I found, It is a K62 and it DOES have 2 drain bolts, so now to change the other side...
btw, why don't they just put a small hole at the bottom between the gear and pump sides so it only needs 1 drain bolt???
