ferris will not start

lovera3878

Forum Newbie
Joined
Sep 11, 2011
Threads
3
Messages
4
hello,
For the past few cuts my Ferris 1500 21hp kaw would not start when I turned the key. Nothing at all. However, then it would just start as if something just clicked. The battery is fine. Now it will not start at all. Just a click and no power. It must be electrical. The fuses are fine.
What do you think?
 

webuyanymower.com

Active Member
Joined
Aug 28, 2011
Threads
0
Messages
88
Sounds like one of the safety switches playing up intermittent electrical problems can be a pain in the grass to solve start by checking all the safety cut outs and relays
 

taxidermist

Well-Known Member
Joined
Jun 4, 2011
Threads
2
Messages
112
Starter solonoid may be shot. Tap the solonoid when you get a no start and it might start.
 

bubbaboy60

Forum Newbie
Joined
May 21, 2013
Threads
1
Messages
4
I have a Ferris 1500 and the other reply was correct...check the plugs on all three safety switches..one under the seat and the two on the Zero turn arms....also make sure the parking breaks is in the up position and the cut blades switch is OFF.
 
Top