Export thread

ExMark zero turn

#1

M

mike coulter

Seat and park brake safety switches are good. When I start it it runs but as soon as I release the park brake it dies.
Any information would be greatly appreciated


#2

Craftsman Garage

Craftsman Garage

Are the wires for the safety switch circuits good?


#3

M

mike coulter

Craftsman Garage said:
Are the wires for the safety switch circuits good?
Click to expand...
Yes sir. I’ve checked all of them


#4

Craftsman Garage

Craftsman Garage

Craftsman Garage said:
I wonder if the ignition switch is bad
Click to expand...


#5

M

mike coulter

One thing I haven’t checked. I also checked out the seat delay module and it’s good


#6

M

MParr

Give us a model number and serial number. The lower end residential Exmark mowers are clones of the Toro Timecutter.


#7

M

mike coulter

MParr said:
Give us a model number and serial number. The lower end residential Exmark mowers are clones of the Toro Timecutter.
Click to expand...
Here you go IMG_2372.jpeg


#8

StarTech

StarTech

1727802440736.png
www.partstree.com

PartsTree - Home of OEM Parts for Outdoor Power Equipment

Parts lookup and repair parts diagrams for outdoor equipment like Toro mowers, Cub Cadet tractors, Husqvarna chainsaws, Echo trimmers, Briggs engines, etc.
www.partstree.com www.partstree.com


#9

M

MParr

Go back and recheck the seat safety switch and seat delay module.


#10

M

mike coulter

MParr said:
Go back and recheck the seat safety switch and seat delay module.
Click to expand...
Well I finally got the seat delay module in this morning, installed it
Repaired the carburetor linkage and cleaned the carburetor.
Fired right up but when I went to release the park brake it still dies.
I’ve checked all of the safety switches.
I’m at a lose at this point


#11

M

mike coulter

Thanks to everyone that responded!
Figured it out
At first all safety switches tested good but I went back through them and the one on the right lap arm tested bad. Luckily I had one in my shop.
Fired it up and released the park brake and it stayed running


#12

S

slomo

Glad to hear it's running. Thanks for letting us all know.


Footer Links 1

Top