Hello all. New to the board. I have an Exmark LZX980ERC96RW0 and experiencing electrical issues. I keep blowing a 10amp fuse when trying to start mower. Also the main 60amp melted into fuse holder. I'm assuming it's grounding out somewhere but I'm unable to find it. Any suggestions would really be appreciated.
Exmark LZX98 with wings electrical issues
- Thread starter castroid
- Start date
dfbroxy
Well-Known Member
- Joined
- Aug 31, 2017
- Threads
- 18
- Messages
- 258
Try following positive battery wire to silenoid. Check to make sure its grounded. Some are self-grounding so u might need to take it off to check behind it for rust. It could be somehow it shorting to ground itself and need to be replaced. This only happens rarely so check every wire and switch before replacing it.