Eratic RPM

suemikehome

Forum Newbie
Joined
Sep 25, 2013
Threads
1
Messages
1
Engine on aAgri-Fab tow mower (finish bushhog). Engine has new carb., fuel lines, filter, and fuel shut off. With throttle plate in open position RPM is about 800-1000RPM and when it feels like it the RPM,s will rise to 2000-2500 RPM and mower works great for a few minutes then the cycle repeats again. Thought about valve adj. but engine starts excellant.
Not much hair left

Briggs & Stratton

14.5 HP IC
Model 280H07
Type 0130E1
Code 061206ZA

Thanks,
Mike
 

ILENGINE

Lawn Royalty
Joined
May 6, 2010
Threads
43
Messages
10,736
Remove the valve cover and the spark plug, and turn the engine over by hand while watching the valves open and close. make sure both valves are opening the same distance. I have seen the intake lobe of the cam wear down to almost round and the engine would only run about half throttle.
 

Fish

Lawn Pro
Joined
Aug 2, 2013
Threads
11
Messages
5,143
Engine on aAgri-Fab tow mower (finish bushhog). Engine has new carb., fuel lines, filter, and fuel shut off. With throttle plate in open position RPM is about 800-1000RPM and when it feels like it the RPM,s will rise to 2000-2500 RPM and mower works great for a few minutes then the cycle repeats again. Thought about valve adj. but engine starts excellant.
Not much hair left

Briggs & Stratton

14.5 HP IC
Model 280H07
Type 0130E1
Code 061206ZA

Thanks,
Mike

adjust the valves first, but as said before look at the top end while rotating the engine.
 
Top