Just purchased a used chipper shredder 24A-424G766. Sat for a number of years, plastic still on portions. Had my John Deere dealer to replace carburetor, change oil, plugs, etc. runs good.
The engine is a 10HP B/S and look as new too. TroyBilt said it is a 2004 from serial number...Question is, there are two oil filler locations, one for engine and one, I assume for the shredder itself. I cannot find in operation manual if both ports use the same oil. That's my problem.
Neither the manual or pictures show this fill port. I found out from a gentleman on another forum the port is for liquid grease, and to use Benalene 920. Look up on the web, very expensive. Any thoughts?
