Chainsaw points ignition problem.

upupandaway

Well-Known Member
Joined
Jul 3, 2015
Threads
33
Messages
590
Just stopped running with no spark. Tried swap sparkplug.
Troubleshooting, I checked the points gap, and resistance open infinite and 0 when closed- being i disconnected the ground and from the ignition coil.
I tried swapping the condenser(with a new one) - i want to test that R goes up but i can't find my good meter and the one i DO have resistance stays at 0. Still no go.
That leads me to the coil itself(right???) and i measured the coil(from points end) and got 3Ohms. What now?
 
Top