Export thread

I need to rebuild a carb on a 18 1/2 hp briggs engine. Where could I locate any help on this?
thanks. gas is coming out of the front at the fuel pump area.

Post up the engine model number/type or tell us what carb you have fitted, that way we can give you right info for that carb.

The model number is 42A707. The type is 2653 E1 The motor is a twin cylinder Briggs 18 1/2 hp.
Thanks for update.

You could just go for a fuel pump kit, but I would go for the carb kit, go by the pic's give the carb a good clean (jet(s) ) if you have any problem's just pop back here.

If you need info/parts list you can download it here....http://sereso.dnsalias.com/Datos/archivos_pdf/Briggs_and_Stratton/42a707.pdf

The brass seat take certain way to remove on those. I use a tap to remove it. Others on here probably do it differently. Briggs actually lists the part numbers to make your own seat remover.

Thanks for the info. I will look at it in the morning.

Thanks for the information. I just finished mowing my lawn and the mower ran really well.
Thanks again