Is there any way to change the belt without taking off the whole deck. The deck is attached by these six giant bolts, and I don't really want to try to take them off. I can get the belt off the pullies, but the space the belt has to go through to get it off that is is about 1/2" wide, and the belt is like 3/4" wide. I might be able to yank it out if I use my legs for leverage, but am less certain I would want to subject a new belt to that same force to try to squeeze it through (the gap where the deck is next to the mower) to put a new one on. I can provide pictures or whatever if it will help. The belt I am talking about is #9 on this diagram:
