Export thread

briggs & stratton 21hp- gold series -540cc-per-sae-j1940

#1

S

sleeper442

motor has spark & compression---------will not start or make a fart 2 start---


#2

Boobala

Boobala

sleeper442 said:
motor has spark & compression---------will not start or make a fart 2 start---
Click to expand...


post your engine's model,type, & code numbers .... have you tried to give a "shot" of gas into carb inlet to see if it attempts
to run,..?? might also want to check your valve adjustments ..


#3

S

sleeper442

sleeper442 said:
motor has spark & compression---------will not start or make a fart 2 start---
Click to expand...

tried starting fluid--nothing-model # 331877-type 0869 G5 code 1100 62D Briggs & Stratton gold series


#4

Boobala

Boobala

Have a look at these ...... remember an internal combustion engine needs 3 things to run.. fuel, spark, & compression...

https://www.briggsandstratton.com/na/en_us/support/faqs/browse/engine-problem-solving-tips.html

https://www.jackssmallengines.com/diy/small-engine-troubleshooting/


#5

S

sleeper442

Boobala said:
Have a look at these ...... remember an internal combustion engine needs 3 things to run.. fuel, spark, & compression...

https://www.briggsandstratton.com/na/en_us/support/faqs/browse/engine-problem-solving-tips.html

https://www.jackssmallengines.com/diy/small-engine-troubleshooting/
Click to expand...

I FOUND OUT WHY MY ENGINE WOULD NOT RUN ----BROKEN INTAKE PUSH ROD------NOW I HAVE A NEW ONE---WHEN I WAS PUTTING IT BACK TOGETHER I FOUND 2 BUTTON TYPE CAPS--------I DO NOT NO WHERE THEY CAME FROM------CAN SOMEONE GIVE ME SOME INFO---------THANKS-------I HAVE NO REPAIR BOOK--------


#6

Boobala

Boobala

sleeper442 said:
I FOUND OUT WHY MY ENGINE WOULD NOT RUN ----BROKEN INTAKE PUSH ROD------NOW I HAVE A NEW ONE---WHEN I WAS PUTTING IT BACK TOGETHER I FOUND 2 BUTTON TYPE CAPS--------I DO NOT NO WHERE THEY CAME FROM------CAN SOMEONE GIVE ME SOME INFO---------THANKS-------I HAVE NO REPAIR BOOK--------
Click to expand...

I believe this is YOUR repair manual ..

..........https://drive.google.com/file/d/0B6NaqjIxWV1ybEN0LWo3azl6OUU/view

Those parts you found MIGHT be from the valve train area seeing you had a pushrod problem...
thank you for your feedback... it helps other members in a similar situation ... keep us up dated ...:thumbsup:


Footer Links 1

Top