iguanamanaz
Forum Newbie
- Joined
- Jun 27, 2011
- Threads
- 2
- Messages
- 2
I have a Briggs & Stratton 24 HP engine (445677-0827-E1) on a Craftsman 46 inch riding mower (917-288280).  It cranks well and gets fire.  It starts briefly with starting fluid but won稚 run for more than about 1 second.  It has new fuel and I致e confirmed the fuel pump is pumping fuel into the carb inlet.  I removed the carb and cleaned it thoroughly and confirmed the governor is adjusted properly.  I put it back together and it started right up.  I drove it for about a minute and parked it last night.  This morning it cranks but won稚 start again (except briefly with starting fluid).  I let it cool and then confirmed I could hear that the fuel solenoid was clicking when the key is turned on and again when turned off.  I then touched the solenoid and found it very hot to the touch. I confirmed the solenoid is retracting when the key is on and extending when the key is off.  Any assistance is appreciated.
	
		
			
		
		
	
			
			