Export thread

bricktop has a miss

#1

reed

reed

my 77 model bricktop runs great but about every 20 to 30 seconds it has a miss ....other than that runs strong...what is causing this...any suggestions


#2

Fireman 123

Fireman 123

Have you tried to adjust the air/fuel setting? I would tighten it until it bottoms out, then back it off a couple turns. You may have to fine-tune it some from there. How does it run under a load?


#3

reed

reed

is that the large green knob on the carb on top


#4

Fireman 123

Fireman 123

Yes, that'd be it. Here's some info from the book.

Attachments









#5

reed

reed

hopefully that will solve the annoying miiss..is this common


#6

Fireman 123

Fireman 123

Hopefully. In my experiences, it's not uncommon to have to work on the old lawnboy carbs. They're really simple, and replacement parts are cheap.


#7

jmurray01

jmurray01

Let us know if you get it fixed.

A misfire is always annoying.


#8

reed

reed

just curios would the loose on off primer switch jumping around cause this miss ...have nt replaced it yet ...it has a spring on it mya be causing this hmmmm.will let yall know


#9

Fireman 123

Fireman 123

The bricktop has a points/condenser ignition system. I would look to see if you have any loose wire connections, or worn parts. Good luck.


#10

reed

reed

woohoo half a turn on carb miss is gone ..thanks again guys .runs like a beast


#11

jmurray01

jmurray01

woohoo half a turn on carb miss is gone ..thanks again guys .runs like a beast
That's great news! Glad to hear she's running well :thumbsup:


#12

Fireman 123

Fireman 123

Glad you got the gremlin out! Good deal.


Top