I have a Husqvarna 125b blower which fails to fire. I have tried a new spark plug and ignition coil. I also checked connectivity of the kill wires and switch. I had the new ignition coil replaced after a "no fire" condition. I have set the coil at .006 in (.005-.008 is what I believe the air space on the flywheel to be set at) and have tried "calling card" sized spacing
but still no fire. I have shot B12 into the cylinder prior to reinstalling the new spark plug (.024 gap); it should have fired. I've exhausted all my shade tree knowledge on this problem and would appreciate ANY help. Thanks in advance.
