Export thread

Big dog alpha. What size belt does it use?

#1

B

BBill

Had it 3 years and original belt like to change before it breaks


#2

R

Rivets

Do you have any ideas how many different types of units Big Dog has produced? Not going to get much help unless you post model and serial numbers for your unit. Our ESP and crystal balls are very fuzzy due today’s climate. You must help us before we can help you.


#3

B

BBill

Do you have any ideas how many different types of units Big Dog has produced? Not going to get much help unless you post model and serial numbers for your unit. Our ESP and crystal balls are very fuzzy due today’s climate. You must help us before we can help you.
OK here you go...Model no. 939124 Ser no. 18062432 Thanks for your help! There are 2 different sizes of bely


#4

B

BBill

Do you have any ideas how many different types of units Big Dog has produced? Not going to get much help unless you post model and serial numbers for your unit. Our ESP and crystal balls are very fuzzy due today’s climate. You must help us before we can help you.


#5

R

Rivets

Do you need deck belt or drive belt?


#6

B

BBill

OK here you go...Model no. 939124 Ser no. 18062432 Thanks for your help! There are 2 different sizes of bely

Do you need deck belt or drive belt?
That's alright. Did you find out what size belt.


#7

B

BBill

Prob both, deck and drive


#8

A

Auto Doc's

I think this is going to lead you back to a servicing dealer on this one. I searched several sites and parts are elusive through most normal parts sources.


#9

R

Rivets

Try this site. Searching with the little info you want to supply, as Auto Doc says, can be difficult. Hope I picked the right unit. https://documoto.digabit.com/ui/book/552685


#10

B

BBill

I think this is going to lead you back to a servicing dealer on this one. I searched several sites and parts are elusive through most normal parts sources.
Thanks! I found one site where the drive belt is 3/4 128 Also shows belt as 130 so I don't know. That belt is expensive so I don't want the wrong one.


#11

R

Rivets

Since I’m not standing next to you, looking at the unit, it will be very difficult to say what belt length you need. Yes, belts are expensive, but you don’t want to buy a cheaper belt with the wrong angle. As stated, your best bet is to contact a servicing dealer or contact Big Dog directly. Don’t be penny wise pound stupid.


#12

M

MParr

Hustler part # 607162 for deck belt.
Hustler part # 607400 for dive belt
Please verify.


#13

B

BBill

Since I’m not standing next to you, looking at the unit, it will be very difficult to say what belt length you need. Yes, belts are expensive, but you don’t want to buy a cheaper belt with the wrong angle. As stated, your best bet is to contact a servicing dealer or contact Big Dog directly. Don’t be penny wise pound stupid.
was wrong! 5/8 x 138. Big Dog is gone! Hustler quit making them.


#14

M

MParr

Deck belt: Rotary #11661
Drive belt: Rotary #14939


#15

H

hlw49

yes, when Black and Decker Stanley bought Hustler out, they quit building the Big Dog mowers


#16

B

BBill

Deck belt: Rotary #11661
Drive belt: Rotary #14039
What is rotary? That is different part numbers


#17

A

Auto Doc's

Rotary is a supplier.


#18

M

MParr

What is rotary? That is different part numbers
Rotary is an aftermarket distributor.


#19

R

Rivets

BBill, get your act together. There are two different numbers because you said you need both belts so MParr gave you numbers for each belt. My suggestion is if you don’t understand this, don’t try to change either belt. Might be in over your head.


#20

M

MParr

BBill, get your act together. There are two different numbers because you said you need both belts so MParr gave you numbers for each belt. My suggestion is if you don’t understand this, don’t try to change either belt. Might be in over your head.
I edited the drive belt number. It's 14939.


#21

B

BBill

BBill, get your act together. There are two different numbers because you said you need both belts so MParr gave you numbers for each belt. My suggestion is if you don’t understand this, don’t try to change either belt. Might be in over your head.
I didn't know what rotary is! I know there are two different numbers! The rotary numbers made 4!!


#22

B

BBill

I didn't know what rotary is! I know there are two different numbers! The rotary numbers made 4!!
I know how to change belts!!!


#23

M

MParr

I didn't know what rotary is! I know there are two different numbers! The rotary numbers made 4!!
Do you have a Hustler dealer near you?
If so, call them.


Top