Hey folks, was hoping someone here could help me. I cannot figure how this belt goes? It's the right belt, it just came off when I hit something. I've looked for a diagram everywhere and looked at other mower diagrams and zero luck. It's a woods f25l mower. Thanks for any help at all! Nevermind how it's on in the pic. I know thats not right and flat sides to idler and v side to pulley. Just desperate.
Assuming that the rear pulley is the power input pulley for the deck. From that pulley take the belt around the idler pulley to the left in the picture, that is the tension pulley and is normally the first pulley after the power pulley. Then go around the spindle pulley on the right in the picture, then behind the idler pulley next to the front spindle pulley in the picture, around the front spindle pulley and then to the spindle pulley on the left in the picture under the cover.
