Export thread

B & S running rough model # 96114000718

#1

J

jadester

Hi. newbie here. got a little weed eater mower I use for places I cant get with rider. Its got fresh gas, clean air filter and new plug. So I figure it must be carb. When I took off air filter I noticed the small spring was broken. Thereare two on the carb. would this make it run rough? Any help appreciated......Brad


#2

R

Rivets

Please post the numbers on the black metal shield over the muffler. Would make it alot easier for us.


#3

J

jadester

OK. Sorry about that. 300 series model 9S502 Type 1019B1 Code 08041715


#4

R

Rivets

This manual should help you, look at the section about carbs. It has some good illustrations. Yes, the broken spring can result in rough running.

https://doc-04-5o-docs.googleuserco...253/*/0B6NaqjIxWV1ycG8wd0s3Z2Q2X00?e=download


#5

A

anthonysemech

jadester said:
Hi. newbie here. got a little weed eater mower I use for places I cant get with rider. Its got fresh gas, clean air filter and new plug. So I figure it must be carb. When I took off air filter I noticed the small spring was broken. Thereare two on the carb. would this make it run rough? Any help appreciated......Brad
Click to expand...

To verify you have a fuel issue spray carb cleaner in the throat of the carb-then start it- if it's starts and dies then you have a fuel issue. But it won't rule out if you have compression problem. Then rebuild the carb.


#6

J

jadester

Is there anyplace I can get just the spring? thanks


#7

J

jadester

got her running better. thanks so much for the help....Brad


Footer Links 1

Top