b/s 40h777-0168-e1 will only start when starting fluid is used, once starts runs good, carb has been cleaned fuel pump is working
any suggestions would be great
thanks
ac
Clean the pilot circuit if it has one and adjust the choke proper.
Wouldn't hurt to clean the fuel tank like a new one, as in spotless. New fuel line from tank to carb. Make sure you have a solid stream of fuel AT the carb inlet. Drain it in a glass jar. Also look for water in the bottom of the jar.
#3
ILENGINE
Your symptoms normally point to a choke that isn't closing all the way. Check and make sure the choke is actually fully closed when starting cold.
