Export thread

Not sure what this part is called, or where I would obtain a replacement. You can see the broken off part in the pictures.

Taking it in for repair really isn't an option, and I'm more of a DIY duck myself.

If anyone knows of any relevant repair videos that would be helpful, it'd be much appreciated.

I didn't see any other markings on the zero turn other than Hustler and I believe it's a raptor.

You need to find the tag on the mower's frame and get the model numbers off of it.

Then you can go here and download anything you want.

https://www.hustlerturf.com/support/manuals

Any hints as to where I might locate it? I swear I've looked it up and down and haven't found anything.

Nevermind, must've been temporarily blind 931899 is model. Appreciate the link.

https://www.hustlerturf.com/file/45f4a4fe8e57ce9dc7baa50f83096f0ec71af5d4.pdf#G5.591463

I believe it's 16 606106 1 LS STEERING BOX SUB ASSEMBLY.

Actually thinking it may be 22 606105 1 RS STEERING BOX SUB ASSEMBLY.

I'd pull that part off and MIG weld it back together.

Probably add a plate so it doesn't break again..

If I had the tools and skills.

ducker said:

If I had the tools and skills.

Click to expand...

Depending on the price of the new part, might be worth while to find a local welder.
It'd take longer to pull the part off than to weld it..

https://www.hustlerlawnmowerparts.com/hustler-part-606105/

$35.56

Don't know anyone personally. Seems like a pretty tight spot too.

TECHNICAL SCOOLS LIKE TCAP HAS A WELDING CLASS AND STUDENTS ARE ALWAYS LOOKING FOR A PROJECT. LOOK FOR A SCHOOL IN YOUR AREA. I HAD SEVERAL PIECES WELDED FOR FREE.

I would just get the factory part and be done with it.
$35 is cheap!

How many hours on your machine?
If not too many I would call Hustler direct. You might get a free replacement part.
.
.
.