Hi, I am looking for any good info and photos of the linkage hook up for the Tecumseh push mower carb, I removed it and unfortunately was not able to remember the exact hookup of the carb linkages when I put it back together. The mower will run but only at high speed no matter what I do with the throttle cable, fast or slow. It is a 1994 or so Murray 22" push mower in great condition if I can get it to adjust the speed again.
Thanks :smile:
#2
EngineMan
Could this be the one there so many different type's...!
Thanks for the response, however, the one I have has a curl in the wire that connects from the governer linkage to the carb, not sure if that curl needs to be between the two legged bracket coming off the carb or on the front or back? Also not sure exactly how all those connections work together yet, was hoping for a photo to see if I put it together correctly than can see why the speed does not change when the throttle is adjusted.
Thanks!
#4
EngineMan
I have few more to look at....! if you still can't work it out take some photo's of what you have and post them up, someone here maybe able to work it out for you.
