12ABO6M5710

Scrubcadet10

Moderator
Staff member
Joined
Sep 24, 2017
Threads
248
Messages
6,432
Need some advice with this Cub SC500 z

12ABO6M5710​

Need to replace the drive belt on it, However, i don't see a way to get the new belt on, with the guards around the trans pulley....i could probably loosen the pulley and slip it on that way but i'd rather not.. I did some reading on another forum and the guy said he loosened 2 screws that held the belt guards in place, but i'm not seeing anything like that on this one. Slightly stumped.
Any of y'all have experience with this one?

Thanks, Scrubby.
 

Scrubcadet10

Moderator
Staff member
Joined
Sep 24, 2017
Threads
248
Messages
6,432
Seems like i always find the solution after i come here for help, LOL.
had to look a little further down for those screws.
On another note, i will need to replace, at least, the float needle, If one of you gents could help me locate a part number if possible,
the carb # is

951-05531​

and it's a "Cub cadet" 5X65MU engine.
1685582425661.png
 

Attachments

  • 1685582425661.png
    1685582425661.png
    8.9 KB · Views: 0
Top