tires

I've been reading lately in miscellaneous forums that folks are inflating their drive and front tires with pressures of 8-12 PSI. I have a Hustler X-ONE, and for all of these years I have been inflating my tires with the max pressure embossed on the side of the tire (20 PSI rear, 28 front). It...

I've got an OLD Snapper LT-125 - with the original wheels, and have changed the tires - yearly - because... well... mesquite tree thorns. I'm over fighting the air-filled small tires to get them installed on the wheels - and really would like to move to some flat-free options. And note: I'm...

Are they solid rubber? Do they have any give at all, or are they unforgivingly hard?

I have an Ariens 42" riding mower and the front tires don't have much tread so they slip on hard turns- do the least expensive replacements last long, or should I spend a few bucks more and buy something else? It has Carlysle tires now. Rims are spotless, so I'll just replace the tires.

Lets say you are working with a tractor or other vehicle that weighs around ten thousand pounds. You have one of the wheels off and you fill it to about 60 psi which would be about right for a Class E tire. You put the tire back on and lower the vehicle to the ground. You check the tire pressure...

Hello. Hoping you folks can help me get a clue. I own a Ryobi RYRM8002 electric zero turn. No eye rolling. But, please read on. The help I need is probably more general than I realize, *other* than the mower requires a tire size that in a more aggressive tread pattern is hard to find. The...

I'm finally going to replace the rear tires on my RZT50. It still has the original Calisle 18X9.50-8NHS on it. I'm looking for a good source for these same tires. Would it be better to take the wheels & tires to a shop for replacement or just buy the tires then do the tire mounting myself?

The tread on the rear tires of my HRR216VKA are worn out with no grip on hills etc, the fronts are still good: 1. Can I swap the front & rear tires only? 2. Can I swap the the front & rear wheels? 3. Are replacement wheels with a more chunky tread available? Thanks, Trevor.

I am looking for some 18x8.5-10 tires for my walker mower. What are some good brands that will last awhile? Thanks Steve Falmouth, ME