plug

90 hours. I've never had to add oil. Plugs look a bit rich to me. FS600V. Choke fully retracted. Runs seemingly normal. No smoke (black or blue) when running or accelerating. Thoughts?

OK, I've picked quite a few weed ceaters, chainsaws, leaf blowers etc from yard sales over the years and I've been trying to get them up and running. First thing is to dump the gas, then check the sparkplug to see if theres any spark left in it.. Here lies my delima: Where ccan I find a good...

Just came across a new drain plug design on a KT725. Still a 3/8 NPT plug but they now have a T50 torx countersink and not the normal Square drive. Customer just recently purchase a Cub Cadet ZTR with it. Customer was wanting to know how to get it out and I had go onsite to see was up with the...

I was going to do hydro oil change on my Toro Timecutter Myride 60 inch mower to find a nasty surprise. There is filler plug on top of transmission, one per each side. I am blessed, I knew well enough to ALWAYS open filler plug before draining any oil. I found that filler plug is covered by...

Was changing the oil on my TB-30R (2020- model 13A726JD023) and somehow messed up the internal threads when I was reinstalling the oil drain plug. Not sure how to fix this so any advice would be appreciated. ChatGPT suggests a thread chaser and if that doesn't work use a tap. But I have no idea...

Hello, Hope everyone is well. Can someone help me please? I have an old briggs and Stratton engine (Model: 252707-0632-01-8408081) but it has a leak on the oil drain end cap. I have verified that the end cap is tightened well but the leak persists. Is there supposed to be a seal inside of the...

have a kohler ch25 that runs but have noticed that power drops off, after running for a little bit compression is 125 and 115 one plug looks good but the other has the black soot on it could i have a bad coil on that side thanks

Please help. Thanks, John