mower deck

I have a 50" mower deck on my Magnum that does 1 of 3 things when I pull the switch to turn on the mower deck. 1). Blades turn on ok. 2). Nothing happens. 3). The motor is dragged down until it dies. Seems to change whenever it wants to. Any suggestions? Ty

Has anyone on here rebuilt one of the double pulleys used by Cub Cadet, MTD, Ariens, etc.? I ordered a new pulley and rebuild kit and the bearing outer races are a slip fit in the pulley hub. I know that the rotating outer race should be a press fit but was wondering if it is not in this case...

Ten years in, the mower deck idler pulleys began a death rattle. I checked with the local small engine repair shop and two genuine Toro parts were $65. On line Chicom parts were $45. Most of you know the idler pulley has a bearing held between two halves of the pulley which are riveted...

I have a 2014 Broadmoor, model 2691178, 52 in deck. How can I tell when I have pumped enough grease into the blade spindle grease zerks? The usual sign of grease oozing out somewhere isn't present, at least not from the top of the deck.

New member. New Ferris 3300 w/ 60 in deck. Deck noise/intensity cycles about every 20 seconds from smooth to higher intensity/noise. Same while mowing or sitting still. Sometimes difficult to notice, other times more noticeable. Dealer demo had 15 or so hours on it, but I noticed first time...

Have a Husqvarna YTA 18542-cant keep mower deck belt on when disengaging.at a lost

2 of the 3 bolts that attach the engine to the mower deck ripped out of the mower deck of my self propelled push mower. What is the fix for this? I don't have access to a welder.

Does anyone know the torque for the top spindle nuts (5025405, 3/4-16 Hex) #8 on attached diagram for ISX2200 Mfg. No: 5901845 ISX2200 Series w/ 61" ICD Mower Deck? Or just use the standard torque formula?

13AK608G129 sn# 1E230H10530 (year 2000) Looked a several parts sites they all had the same exploded views but didn't list the belt.

Over the weekend I bought a Troy Bilt riding mower (22 hp engine 46 in deck) from a friend and the only issue it seems to have is that the deck wont engage in high gear. For reference, it has what I call a Hydro-Shift transmission (shift into forward high, forward low or reverse with a shifter...

I didn’t want to drill holes in the side of my deck so I bought 1” wide aluminum and applied it with double sided tape. I bought the 1”x1/8” thick 48” long aluminum flat bar and the Gorilla Heavy Duty mounting tape from Home Depot I cut 2 strips 13” long and beveled the ends, I pre-bent the flat...

When I blew the engine on my riding mower the other day, I wasn't ready to buy a new mower, Remembered I had kept my previous mower, a 1980 Murray 36-inch cut, that had been sitting in the storage shed about 15 years. Drug it out, pumped up the tires poured in some gas, jumped it off and was...

please delete

I was just wondering, I have a husqvarna yth21k46 that has the manual lever blade engagement and I know a guy that has a 54 inch deck but I'm pretty sure th 54inch deck came off a mower with electric PTO and I was wondering what I would have to do to make the 54 work on my mower. Any help would...

Does anyone know what part number this is? It mounts on top of the lift arm brackets to prevent the bracket from slamming into the mower frame. I call it a bump stop. I don't know what John Deere calls it. I have had exactly zero luck finding it online.