ignition

New poster here. I've enjoyed reading this forum over the years, but never made any posts, but I'm in need of some advice. Background: A few years ago, I bought a Husqvarna YTH2348 with a Briggs engine for $500 from a guy who was moving away and needed to offload it. Right up front, he told me...

Last week I noticed my mower with Kohler SV840 was only firing on one cylinder. I checked for fuel, spark, and compression. Found a no spark condition; upon further inspection found a bad wear mark in the plug wire. New coils came in today (Amazon) replaced faulty coil, set air gap. Started...

I have a GSM Wood Chipper fitted with a Briggs & Stratton 18HP OHV V Twin engine. It was running fine & chipping wood fine. It suddenly stopped & will not fire or start. There is no sign of it trying to catch. I have pulled both spark plugs & they are wet with fuel, so it looks as though its not...

Just finished rebuilding this engine. Everything reassembled and I have no spark when I tried to start it. This is a 1979 non-compliant mower with the ground to run switch on the top of the shroud. Old ignition coil has the number 681410 molded into the white plastic next to the spark plug...

I collect Ariens and Brott .. On my Ariens GT20 there is an old Ignition switch with the lugs numbered from 1 to 4 ..it is not a new box type .. I would like to know what the numbers connect to as there is no wiring diagram for this .. I have asked Ariens .. but it seems that my tractor is...

Zero turn Toro 74398 ignition wire is grounded with the mystery switch ? Its old. I have never had a parking brake. Does this have one of these crappy Brake Modules (121-3017) ? What is a slick way to eliminate all the sissy switches ?

1989 L21ZPN with the handle lever / bar actuated flywheel brake and coil ground wire combination assembly. Does the wire from the switch tab to the coil tab need to be grounded to run or grounded to stop the engine? I also have a 1979 8237 and I am pretty sure the off / on switch on the shroud...