drive belt

About a week ago my brand new Ferris IS2600Z Diesel threw a drive belt do to a branch that wedged up into the belt and pulley . I could not move back or forward. I got a look and saw that the drive belt (top belt) not the deck belt came off of the pulley. So the hydraulics were not working...

Model 917.203900....2014 with Briggs 22 hp with RS 800 transmission my mower has 4 drive pulleys and I am having an issue with the drive belt coming off. The pulley its coming off from is the smaller back one near the transmission. It has a belt keeper on it and I have it bent down as far as I...

got a troy-bilt 47276 chipper from my brother. the engine was previously replaced with a predator 212cc. the original belt size is reportedly a 5LK 5/8 x 29in. the 29" is too short so i've been trying 5LK300 (30") belts. they tend to break very easily; i broke 3 today. believe i need to...

I changed the two drive belts on my TB30R. Now the mechanism that pushes the idler pulley of the lower belt out of the way so that the mower can be stopped and gears can be shifted will not release the tension on the belt sufficiently to allow me to stop the mower or change gears or direction...

Hi all I have had my mower for over 20 years now, and on the third drive belt. I have put in a genuine JD belt about 20 hours ago, and in the last 10 hours, the drive feels like it is slipping. I am not sure it is the belt, but it is slow and has issues with hills or tough forward progress. The...

I belong to a sportsman club with this tractor, the belt needs to be replaced. All information I find on line say this is a very difficult job there is a plate under the pulley, some say to pull motor other all steering linkage Is there any other procedures to help with belt replacement? I'm...

I bought this 2004 Troy-Bilt Pony a couple of years ago as an emergency replacement for my Craftsman with a blown motor. The Pony stopped dead on me last week while mowing my orchard, engine still running blades still turning but no movement. Investigation found the variable drive unit bearings...

10304 SER No. 6917431 Silver Series, I need to change the drive belt and I am not sure what to take apart. I have removed the plastic belt cover and the belt drive cable spring end. flipped it over and removed the blade nut, mulch fan, blade and blade mount plate and the belt guard plate...

Does it make a difference what the height of the deck is when adjusting the drive belt tension? Without a belt tension gauge can it be eyeballed to 1/2", 1", or whatever he slack should be? Thank you.

The drive belt will not stay on the backside pulley when the clutch (left pedal) is derpressed. it is a brand new belt and i am sure it is the right one. I tried to replace the pulley, but the bolt turns with the nut. I don't see any way to get a wrench on top without taking the complete body...

Hi, I want to have a spare drive belt in the shop but can't find the outer circumference of the drive belt-does someone have that dimension? TIA

I was mowing a little to tight to a tre and got stuck on a root. When I finally freed the mower, the transmission stopped working. There was a bit of white smoke and it moved, but barely. A minute or two later, it stopped rolling entirely. None of the gears would engage. Is it the drive belt or...

I have a new Broadmoor with less than 30 hours. When mowing under my gum trees it often throws the drive belt at the trans unit pulley. I think the deck is picking up Gum balls and they are being thrown under the drive belt causing it to roll off the pulley . Has anyone experienced this and...

2005 Fastrak Mini with Honda 16HP. Attempting to remove and replace pump belt. How do I get it off clutch/PTO pulley? Already have deck belt off and pump belt loose.

I have a Murray riding mower - model 46102x6b - which has a broken drive belt. I got another belt, and the two that drive the blades, but cant get the original belt off. I have dropped the deck, removed the two smaller pulleys, disengaged the steering column, and loosened the belt retainer...

Delete this thread

I purchest it last year and hasent given me any trouble until this ( BELT DROKE ). I have it up in the air ready to replace it ( have belt ) but havent done one yet. what is the corect proceger to install and is there a repair manual i can purches. I just bought a new mower ( another tag...