blade

  1. C

    Old GTS5 blade won't engage.

    Has been the most reliable mower ever.Always starts 1st pull and always engages blade when lever is pulled back.Worked fine on last use before winterizing.Started yesterday on 1st pull after being stored since Nov. All seemed normal but blade would not engage. I did notice that while warming up...
  2. AllisChalmersForever1901

    Tips for blade sharpening, how do ya’ll do it?

    I’ve seen ads for blade sharpening tools and such, I used to use a bench grinder to sharpen them until I got an angle grinder. I’ve been using that, but I feel like there is a better way to get a flat edge with a consistent angle. Any opinion on drill mounted sharpeners? Perhaps ya’ll have or...
  3. B

    blade brake glue

    Murray 425001x8E. Blade brake arms (pad assembly) are no longer available. What type of glue would hold brake material on existing arms?
  4. T

    Model 20055 Blade driver has no key but drive shaft from engine has keyway?

    Just replaced the belt on the above model, and noticed when I took all apart that the blade driver has no protrusion inside to fit the key way on the drive shaft. Just wondering if its sheared as I see no evidence of there having been one ....perhaps this is why it's not self propelling? Should...
  5. gfd63

    S110 deck blade spindles free wheeling

    The old belt broke & replaced it with the exact one from JD. When the blades are disengaged & you shut the engine off the blade pulleys still spin & eventually stop. Blades are fairly new & there’s no play or slop with the deck pulleys. Doesn’t seem to be a way to tighten up the belt tension...
  6. L

    Maverick 60 looking for best blade combo.

    I got some gator mulching blades on it now and finding even sharp I have to slow to get it to not leave a bunch of stragglers on it and it’s become annoying. It’s got the Kohler on it and I actually did a little work for more power on this thing and it’s a beast now zero bogging if need to cut...
  7. K

    Blade baffles on walker deck

    I have a 52r deck and the blade baffles are rotting out. I checked parts and see that baffles available for mulching deck but would they fit mine? if Not offered by Walker, are there aftermarket baffles. Thanks for any help tried to attach photo but was too big to attach.
  8. X

    Question About Blade Movement on Lawn-Boy 10682

    Hi everyone, I have a Lawn-Boy mower, model 10682, that was inherited from my grandfather who passed away. I'm changing the blade and I've noticed that when I turn the blade half a turn, it drops about half an inch, and when I complete the full turn, it rises back up. Is this normal behavior, or...
  9. Perky

    Mower blade spindel on a craftsmen R110

    My blade belt twisted in the belt pullies. I wonder if the spindle is bad. It does turn when I try to turn it, making no noise However it wont spin like a windmill. Takes a little effort to turn it. No grease fitting. Can you help me
  10. Justwayne

    Murray blade belt 37x88

    Whats the correct part number for the murray blade belt 37x88?
  11. D

    Husqvarna/Craftsman AWD Blade adapter quandry

    All wheel drive craftsman (husqvarna)..... The blade adapter problems. Replaced it with correct part number, but when it's installed all the way in on the shaft, the pulley portion does not align with the three tension pulleys so that belt will be on the same plane. The belt would likely...
  12. J

    Troy-bilt 11A-B2AQ723 blade turns with blade control disengaged

    Got a free one of these and it runs. It seems like the blade shouldn't spin with the blade control disengaged, but it does. Is this how these mowers work? Am I missing something? - this doesn't seem right. I can't find any documentation on this mower. WIth my Honda mower the blade only spins...
  13. L

    Gravley Blade Offset

    Looking for good HIGH LIFT Blades with the proper offset for Gravely ZX-60. THANKS
Top