Search results

Results 1 to 9 of 9
  1. C

    Troy Bilt TB30 - does not move either in Forward / Reverse

    Check the release pin on the axle to make sure it's not depressed. If it is it won't allow the hydrolic fluid to build pressure and move the axle. Also belt, cotter pin check. I had the exact same one was under 6 foot of water for days still runs... Good luck
  2. C

    What deck's are compatible or straight swap troy-bilt tb42 hydro

    Are the decks and spindles mostly the same? This is a 13a879ks066 troy bilt tb42 hydro riding mower? Any help would help
  3. C

    2015 Troy Bilt 42" Hydro 547cc question: the stock spindles have a grease fitting?

    2015 Troy Bilt 42" Hydro 547cc question: the stock spindles have a grease fitting? Does anyone know if the stock spindles has a grease fitting on them somewhere? Its been raining here last couple days unable to check at the moment
  4. C

    547cc troy bilt engine 2015 trouble

    So last week this started with a slight miss that cleared up on its own while running, now the miss is more pronounced & constant will shut itself off under a heavy load, very hard to restart, also sometimes it will back fire during a hard restart, then black smoke. Thought maybe it was running...
    • cxbxr.3
    • Thread
    • Replies: 6
    • Forum: MTD
  5. C

    2015 Troy Bilt 42" Hydro 547cc troy bilt engine trouble

    Having trouble that just started the other day , the engine misses real bad & died once heavy black smoke (not blue not white) came out of exhaust & was very hard to start. Acts like it is getting to much gas or running rich... I changed the plug, airfilter, gas no help seems to start after its...
  6. C

    Need advice installing oregon mulching blades

    I have a troy bilt 42" 2015 hydro & need to know which way the blades go on, they are mulching blades both sides are sharp they have a concave to them
  7. C

    Can I use a regular o-ring in place of briggs 691917 o-ring ?

    Amazon botched my delivery on this o-ring can I go to a hardware store & use a standard o-ring instead ?
  8. C

    Briggs 10.5hp ohv backfiring through intake *EDIT*

    I got this mower second hand have no history on it other than it would not start, so I replaced the carburetor & spark plug changed the oil & it fired up,, problem is it coughs through the carb about ever 3-4 seconds & causes a slight engine speed surge when it does. I am checking valve...
  9. C

    Troy Bilt tb30r was in flood,, do I need to drain the axle or is it sealed ?

    How do you recommend I treat the axle after it was completely flooded over for atleast 2 days during harvey here in texas ? I have already prepped the engine & almost ready to fire it up.. just concerned with rear end... Thanks 13CC26JD011, date 12/2016 serial 1L076B20544

Footer Links 1

Top