Search results

I have checked for ground at the key switch terminal, it is actually the first thing I checked. The key switch is OEM from Kubota. I have checked and cleaned all my ground connections, at least three times. I have not found a relay in the system, but I am considering installing one.

Sorry I have not responded back. I have checked the coils with an inline spark tester and they are not shutting down. I replaced the engine harness thinking I had bad diodes in the kill wire, even after testing them and the results showed the diodes were good. I have also replaced the key...

I am working on a ZG124E with a Briggs and Stratten 44M777 V-twin engine. The engine runs for approximately 5-10 seconds after the key switch is turned to the off position. I don't know if this is normal procedure, I don't think it is. I have checked continuity from main harness connector to key...

i have a grasshopper model 718 mower and reverse on the right side is extremely slow, i just changed the hydro fluid and filters thinking that maybe the problem, it wasn't. I have checked all the linkages and belt tensions and all are good. I also used OEM fluid and filters to be sure i had the...