Search results

Results 1 to 25 of 25
  1. P

    Replacing broken Craftsman sockets

    I have some impact sockets that I broke using a heavy duty impact wrench
  2. P

    New Graveley ZTXL owner

    For the jerky check your dampeners. Mine started to jerk and one of the dampeners was disconnected
  3. P

    John Deere 175, very hard to steer

    Your king pins may be rusted up and you may have to replace them
  4. P

    tell me about your gravely pro turns

    I have a pro turn 460 with the yamaha engine. I do like the air ride seat. it cuts nice ever since I removed the baffle from the mower deck.
  5. P

    Yamaha engines

    Yes it is the EFI
  6. P

    Yamaha engines

    I had a Kawisaki before and my Yamaha uses less gas I can mow 3 acres and only use about 1 gallon the Kaw used about 2 gallons
  7. P

    Yamaha engines

    What don't you like about it. My EFI one runs really good and is real stingy with the fuel. I can mow my place and only use about 1 1/2 gallons of gas where the Cub Cadet that had the Kow with less HP used abot 2 1/2 gallons
  8. P

    I drove a gravely for the 1st time today

    I have a Gravely Proturn 460 and my sister in law has an older Gravely 52 or 54 and I had to mow for her as her husband left her. I used her mower and swore I would never use it again as it has no suspension and mine has an air ride seat it about killed me from the bouncing. My wife ask why I...
  9. P

    Pro Turn 460 clumping

    Those look like the blades I have not changed them just sharpen. I have read that the Exmark blades work better so I think I will try a set of them. They have a notch on them that people say makes them discharge better. My baffles are not adjustable.
  10. P

    Pro Turn 460 clumping

    The grass is dry the deck is adjusted right the tire pressure is correct and the Blades are Gravely
  11. P

    Pro Turn 460 clumping

    I have a 2017 Pro Turn 460 and I am not getting a nice cut. It has always seemed to clump the clippings and leaves the yard looking real bad I have sharpened the blades tried raising the deck tried different speeds but nothing seems to work I am only cutting about 3/4 inches off the top I have...
  12. P

    LM21SW starting issues

    I use a velcro strap for that on my Lawn Boy.
  13. P

    LX 46 EFI Won't start

    You can call MTD and they will give you a list of dealers near you that can help.
  14. P

    Gravely proturn152

    go to the parts list and see if it is listed.
  15. P

    Reverse Problem with my new Gravely

    Call a different dealer and see if they have the same problem. Call Gravely and see what they can do for you. I had a Cub Cadet that had a problem that could not be fixed in 6 times to the 2 different dealers and finally they warrantied it out and I ended up with a Gravely as it was the end of...
  16. P

    Looking at Pro-Turn Z, any issues with Gravely engine to know about?

    I have the Pro Turn 460 with the Yamaha engine that I really like. The air ride seat is a real bonus that makes it comfortable to mow for hours. I had a Kawasaki mower before and the Yamaha uses less gas even though it is 33 hp compared to 28 and is quieter also.
  17. P

    New GT50 starter issue

    If they adjust the diameter of the gear then a 9 tooth is fine smaller gear would give a little more omph
  18. P

    Gravely ZT 2044 XL Damper question.

    My Proturn 460 had one of the lugs that hold the damper to the frame break and it was causing the same problem $2.00 part
  19. P

    Pro turn 460 fuel tank

    Does anyone know if the string or connector that keeps the gas cap float. I went to fill my tank and hooked the cap and it disconnected the string from the cap and the sting and little ball fell down.
  20. P

    Mowerr bucks

    When I try to go around trees the mower bucks and I have to come to come to a complete stop and try to start real slow. I talked to one dealer and they thought it could be the dampeners does anyone else have this problem.
  21. P

    Yamaha MX 825

    I have a mower with the new Yamaha MX825 engine on it. When I go to start it some times the started will come to an abrupt stop when I crank it. It may turn spin about 1/2 turn then freeze or it may spin 2 or 3 times then freezes. I have it in for service but the mechanic is stumped. It is a...
  22. P

    Pro turn 460

    I just picked up a Pro Turn 460 with a Yamaha engine. The dealer was of very little help with the operation and since it was a replacement for a warrantied out Cub Cadet Tank he assumed I knew all about it. today I went out to mow and when I went to start it the engine would only spin about...
  23. P

    how to get a replacement mower

    I have a Tank L 60 that has been in the shop or a problem that they just can't fix. The neutral control arm keeps bending and I keep taking it in under warranty. It this is the 5th time that I took it in and I replaced it 1 time myself. Every time they say that it is fixed. After 3 times at...
  24. P

    uneven cut

    I have a problem that when I am cutting on level ground my cuts are real nice and even but when I am cutting across a slope I the low side cuts to short it doesn't matter wich way I go
  25. P

    wheel spindles on a tank

    I was wondering if you could change the wheel spindles on a Tank L to the spring spindle that Hustler uses
Top