Search results

When you try to start it do you hear a click at the Solenoid? If you do not see if you can turn the blades by hand. if you cannot I would say you have a bent shaft.

When you try to start it do you hear a click at the Solenoid? If you do not see if you can turn the blades by hand. if you cannot I would say you have a bent shaft.

Windows 11 is the worst. They have put so many places to go to that I cannot find what I am looking for. Like picture they show the same way to get to them, but when you use it, all of the files are not there. Now you have a Home a Personal and a Gallery. It takes a while to find your files...

I do not know what to think. Yesterday and this morning it was surging. I went back and run it this afternoon after I got your message and it is running well. I tried it at different speeds and mowing a little it still ran well. So, I do not know. I do thank you for your information Melvin.

I have a Briggs Model 356442, Type 0224-B1, Code 090119. It is surging at all speeds. What would cause it do do that. How can I fix it.

Do they made parts to rebuild the pump? If they do is there a parts list?

I have a oil pressure gauge and it shows 0 pressure.

Grasshopper 616 Model with a Briggs model 356442, Type 0224-81, Code 090119. Is there any way to check the oil pump before I order a new one? Is there any specs. on the pump that I can get?

Is there any specs. on the pump that I could get so I can check the pump? Is there any way to check the pump before I order a new part?

I thank you for the information I have been able to find the original part. Melvin

I cannot find the oil pump in the parts list. Do you know the part number for the pump? Where do you find the date code.

I have a Grasshopper 616 with a Briggs Vanguard engine Model 356442 Type 0224-B1. I am not getting oil on the top end. I took the valve cover off and ran the engine I did not see any oil. Could you tell me what it might be the cause. Also what I need to do.

Have you checked the flatness of the head and block?

Remove the head, take a straight edge Across both head and block. Use a feeler gauge and see if you and put it between the straight edge and the head and also between straight efce and block.

Have you checked the head to see if it is flat. It could be warped. Also check the block.

Does this have a hand brake? if it does have you checked to see if it is engaged?

I have a 1997 616 grasshopper that when I mower with it in about an hour it starts to lug down. I disengage the blades and it runs good. When I disengage and then try to engage the blades again the clutch will not work. I let it set over night and when I go back out the next day it works good...

I have I 18 hp Vanguard engine. I need to know what the compression should be. I have checked the compression and I show 135 on the left side facing the flywheel and 120 on the right. I have to replace the dip stick tube seal every once in a while and was wanting to know if this could cause...

I have A 18 hp Vanguard engine on a 616 Grasshopper mower that I would know what the compression should be. I have checked the compression and have found that on the left side facing the flywheel I have 135 lbs. on the right I have 120 lbs. I would like to know if the right could be putting...

I have a problem with the dip stick tube seal on my Briggs Vanguard 18 HP engine. I have replaced it 4 times once when I overhauled the engine and 3 times since then. 2 times I could not find any of the seal where they went I do not know. The last time the seal was there but was split. I...