Search results

If the brake adjuster nut was adjusted and this problem started, I would go back and loosen the brake adjuster to see if it's the problem. Most brake adjusters do not require much to make a difference. Usually one quarter or one half turn is a lot. Good luck!

Not terribly familiar with this particular engine but, in the days gone by, Briggs Connecting rods could be installed upside down and would cause this problem. There was a small projection on the end that goes inside the piston that must face the bottom of the engine to prevent the rod from...

I just work in reverse. Put the belt on the transmission pulley under the fan first and then thread it through or around the other pulleys. The motor pulley is retained by a bolt through the center and a key in the shaft. It probably won't need to be removed, but it is still easier and saver...

My 2017, I believe, XP Horse started not wanting to move very much after it got warm. The transmission oil looked and felt as it should. I have read about this oil wearing out so I decided to replace it. I was able to pump it out with an inexpensive pump from Harbor Freight (slow process but...